Copper Head Laser Diodes

Started 6th October 2020

Bag of gold top laser diodes

It's cheap to buy 10 laser diodes from ebay, I was not that impressed and they stayed in their bag. One reason, there's no specification, how do I know what current to run them on, or how to drive them. Another aspect is safety, traditional bigger is better specmanship is on display "Military grade laser cat toy", but also "safe low power". It is said that many of the laser pointers are more powerful than described, either because that makes them more attractive or less likely to be stopped at the border.

Eventually I took a closer look and found some interesting features.

Copper head laser diode current limiting resistor

There is a current limiting resistor built in (the white rectangle in the photo on the left), it is 90 Ω. With a forward voltage drop of 1.9 V running from 5 V that gives a current of 33 mA which is in the right area.

Copper head laser diode in pieces

The front will unscrew, this allows some focusing, eventually a spring and lens will pop out. Naively I expect a laser to produce a non-diverging beam, here it is the result of a lens.

Copper head laser diode PCB

The back consists of a PCB with the laser diode fabricated on it, pushed into a slot in the circular metal shell.

Copper head laser diode hole runs from front to back

The result of this is that there's a hole at the back that some laser light escapes from.

Copper head laser diode back view

It is possible to use a sensor here to monitor the light output of the laser.


Click to return to index

Page last modified on October 11, 2020, at 12:23 AM
Powered by PmWiki